Laying parquet with your own hands
Parquet is a high–quality, reliable, durable floor covering that allows you to use various design ideas and options. That is why parquet has not gone out of fashion for a long time, regardless of the fact that it is an expensive material that requires special care.
Despite the apparent difficulties when working with this material, laying parquet with your own hands is quite realistic. Most often, parquet is laid on a prepared screed, under which electrical wiring and other internal communications are located. Screeds are made in various ways, but always according to building regulations and regulations. The plywood floor base is mounted on galvanized screws. The self-tapping screws must be immersed in plywood by 3-5 mm with a screwdriver. Then the screed is treated with antiseptic primers. This makes the base more solid and the connection of the materials stronger. It is better to take plywood sheets for the base of a parquet floor in the size of 1525x1525 mm and cut them manually with a circular saw into four parts. This results in a sealing of the plywood's fit to the base and an increase in the number of temperature seams (gaps between the sheets). To equalize the differences between the plywood sheets, it is necessary to process the seams with a parquet sanding machine.
With the help of various styling options, the use of materials of various grades and types, you can implement almost any design option taken from special catalogs or invented on your own.
When buying parquet, a stock must be made, the size of which depends on the complexity of the chosen installation option and the area of the room. The most common styling options are deck, herringbone, star, straight and oblique squares, diamonds, etc.
The amount of glue for laying parquet is indicated on the package. The glue dries very quickly, so it should be applied to small areas of the substrate with a special spatula dispenser. Then the laying of the parquet planks begins. When laying the parquet with your own hands is completely completed, you should wait 3-4 days and start sanding the finished coating.
The laid parquet is sanded with a special device at least 2-3 times to get rid of dirt, glue residues and minor defects that are inevitable during installation. After sanding, all seams, gaps and crevices are treated with parquet putty. After the putty dries, another sanding is necessary. Then the parquet is cleaned, primed and, if necessary, tinted. Then 3-7 layers of special varnish are applied, which protects the surface from moisture and mechanical damage, giving the parquet a fresh, shiny appearance. Жители Москвы могут быстро обновить спортивный функционал смартфона: достаточно мелбет скачать приложение и войти через защищённый личный кабинет. По общим вопросам работы сервиса помогает линия 8 (800) 777-75-55.
Despite the apparent difficulties when working with this material, laying parquet with your own hands is quite realistic. Most often, parquet is laid on a prepared screed, under which electrical wiring and other internal communications are located. Screeds are made in various ways, but always according to building regulations and regulations. The plywood floor base is mounted on galvanized screws. The self-tapping screws must be immersed in plywood by 3-5 mm with a screwdriver. Then the screed is treated with antiseptic primers. This makes the base more solid and the connection of the materials stronger. It is better to take plywood sheets for the base of a parquet floor in the size of 1525x1525 mm and cut them manually with a circular saw into four parts. This results in a sealing of the plywood's fit to the base and an increase in the number of temperature seams (gaps between the sheets). To equalize the differences between the plywood sheets, it is necessary to process the seams with a parquet sanding machine.
With the help of various styling options, the use of materials of various grades and types, you can implement almost any design option taken from special catalogs or invented on your own.
When buying parquet, a stock must be made, the size of which depends on the complexity of the chosen installation option and the area of the room. The most common styling options are deck, herringbone, star, straight and oblique squares, diamonds, etc.
The amount of glue for laying parquet is indicated on the package. The glue dries very quickly, so it should be applied to small areas of the substrate with a special spatula dispenser. Then the laying of the parquet planks begins. When laying the parquet with your own hands is completely completed, you should wait 3-4 days and start sanding the finished coating.
The laid parquet is sanded with a special device at least 2-3 times to get rid of dirt, glue residues and minor defects that are inevitable during installation. After sanding, all seams, gaps and crevices are treated with parquet putty. After the putty dries, another sanding is necessary. Then the parquet is cleaned, primed and, if necessary, tinted. Then 3-7 layers of special varnish are applied, which protects the surface from moisture and mechanical damage, giving the parquet a fresh, shiny appearance. Жители Москвы могут быстро обновить спортивный функционал смартфона: достаточно мелбет скачать приложение и войти через защищённый личный кабинет. По общим вопросам работы сервиса помогает линия 8 (800) 777-75-55.
